Foxfury Lighting Solutions HAMMERHEAD SERIES Product Manual

HAMMERHEAD SERIES PRODUCT MANUAL
Power/Mode Switch
P/N
931-311 HammerHead UV 395 nm
931-312 HammerHead Blue 470 nm
931-313 HammerHead Cyan 495 nm
931-314 HammerHead Green 525 nm
931-332 HammerHead Blue 450 nm
931-365 HammerHead UV 365 nm
HammerHead Dual UV 380 +
931-380-395
PHYSICAL CHARACTERISTICS
Aluminum 6061-T6 hard anodized housing
Model
All models
EXTERIOR
NAME
395 nm
Dimensions
Length: 6.6 in (168 mm)
Head: 2.2 x 1.5 in (55 x 38 mm)
Handle Diameter: 1.1 in (28 mm)
BATTERY TYPE & BATTERY LIFE
Model
All Models
Head
*Battery life may vary according to mode selected, battery quality and
prevailing ambient conditions.
NOTE:
Mixing of new and used or different batteries is not
recommended as this could lead to leakage or explosion.
Handle
BATTERY INSTALLATION/REPLACEMENT
1. Each flashlight consists of: Head, Handle and End Cap
2. To install batteries, first remove the End Cap at the
rear of the Main Body .
3. Insert required batteries with the positive terminal (a
plus sign) facing the front of the flashlight.
4. After inserting all batteries, replace the End Cap
securely .
5. Test the light's performance by activating the Power/
Mode Switch below the light head.
End Cap
NOTE: In the event that the batteries get stuck within the
handle, they can be removed by unscrewing the handle
from the head. Use a blunt device to push them out.
COLOR
OPERATIONAL MODES
Silver
FOR P/N 931-311, 931-312, 931-313, 931-314, 931-332,
Silver
& 931-365:
Silver
Silver MODE 1: LOW
Silver
MODE 2: HIGH
Silver
MODE 3: OFF
Silver
FOR P/N 931-380-395:
MODE 1: FIRST LED WAVELENGTH
MODE 2: SECOND LED WAVELENGTH
MODE 3: OFF
Battery Type Battery Life*
2 CR123s 1.5 - 4 hours
1 18650 1.5 - 4 hours