Side And Back Panels - Sanyo DP32746 Owner's Manual

Right Side Panel
(see items 8, 11, & 17
on pages 18 & 19)
Power
key
Volume
– + keys
Channel
M L keys
Œ
HDMI (High Definition Multimedia Inter-
face) Input, PAGES 11 and 12—Connect
digital video equipment to this jack. It takes
only one high bandwidth cable (not sup-
plied) to communicate between audio /
video equipment and this DTV. This connec-
tion is compatible with DVI equipped AV
devices. (Separate audio connection and an
adapter are required for DVI device.)

Digital Audio Output, PAGE 14—Use an
Optical Audio cable to connect Digital Audio
Output to an advanced stereo home theater
system equipped with Dolby
Ž
Digital Antenna Input, PAGE 5—Connect
an RF antenna to this jack.

Analog Antenna Input (UHF/VHF/CATV),
PAGE 5—Connect an RF antenna or Analog
cable system to this jack.

S-Video Input (VIDEO1), PAGE 15—To
enhance video detail use the S-Video jacks
instead of the Video jacks, if available on
your external equipment. (S-Video connec-
tion will override connection to the Video
input jack [VIDEO1]).

SIDE AND BACK PANELS

Back Panel (Center)
Œ 
Back Panel—Bottom View (Center)
® Digital 5.1.
Need help?
Visit our Web site at

Ž 
‘
‘
Audio/Video Input (VIDEO1), PAGE 15—
Connect analog video equipment here.
NOTE: S-Video connection overrides the
(VIDEO1) composite video con-
nection.
’
Component Video Input (VIDEO2), PAGE
13—Connect digital video equipment to the
Y, Pb, Pr and Audio L / R jacks. These jacks
will automatically detect the type of signal
being received.
“
Component Video Input (VIDEO3), PAGE
13—Connect digital video equipment to the
Y, Pb, Pr and Audio L / R jacks. These jacks
will automatically detect the type of signal
being received.
”
Analog Audio Out (L/R) Jacks, PAGE 16—
Connect external audio equipment here.
www.sanyoctv.com
Back Panel (Right)
’
“ ”
1-800-877-5032
or Call
9