Sanyo DP32746 Owner's Manual page 18

REMOTE CONTROL KEYS (CONTINUED)

Recall Key—Select the first channel you
want to watch; then select another channel
using the NUMBER keys. Press RECALL to
switch between the channels.
NOTE: The RECALL key cannot toggle between a
Digital channel and an Analog channel.
See TUNER (#6) key description.

Menu key—Press this key to display the on-
screen menu.
‘
Tuner Key—Use this key to toggle from one
tuning system to another, digital channels
and analog channels.
NOTE: The TUNER key is inactive when an
external input is selected (Video 1,
Video 2, Video 3, or HDMI).
’
Caption Key—Press to select analog or
digital captioning. The Analog Caption
modes are: CC1 ~ CC4, Quikcap, and OFF .
The Digital Caption modes are: Digital
CC1 ~ CC6, Quikcap, and OFF .
“
Channel Scanning ( ( CH LM ) Keys—Press
L (up) M (down) keys to tune to the next
higher or lower channel in the Channel Scan
Memory list. The scanning loop includes
analog channels, digital channels, and all AV
inputs.
18
Need help?
Visit our Web site at
PIX1
Gray colored borders
appear at the sides, of
the screen.
Note: 4:3 image without
distortion on a 16:9
screen.
PIX3
Enlarges a Pix2 image
vertically (some of the
image may be cropped
off).
www.sanyoctv.com
or Call
”
Pix Shape Key—Use this key to change the
video display format. Available options
depend on signal received and the broad-
cast's aspect ratio. They may include: PIX1 ,
PIX2 , PIX3 , and PIX4 . See simulated DTV
images below.
•
Audio Key—Press to select the desired
audio mode (if available): DIGITAL: Main,
Sub1, Sub2, Sub3, etc.; ANALOG: Stereo,
Mono, SAP .
Power Key—Press to turn DTV on or off.
11
1-800-877-5032
PIX2
A 16:9 image fills the
screen normally. A 4:3
images is stretched hor-
izontally and may ap-
pear distorted.
PIX4
Stretches the Pix3
image horizontally (por-
tions of the sides
and/or top and bottom
may be cropped off).