Section 4 - Security
It is recommended to enable encryption on your wireless access point before your wireless network adapters. Please establish
wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to the
added overhead.
1. Log into the web-based configuration by opening a web browser and entering the IP address of the bridge (192.168.0.50).
Click on Setup and then click Wireless Settings.
2. For Security Mode in the Wireless Security Mode
WEP.
are valid.
4.
enter up to 4 different keys using the Default WEP Key drop-down menu.
5. For Authentication
6. Click Save Settings
connectivity until you enable WEP on your adapter and enter the same WEP key as you did on the access point.
D-Link DAP-1560 User Manual
Configure WEP (Bridge Mode)
select both the type
Open or Shared Key.
73