Configure Wpa-Personal (Ap Mode) - D-Link dap-1560 User Manual

Media streaming adapter

Table of Contents

Section 4 - Security

Configure WPA-Personal (AP Mode)

It is recommended to enable encryption on your wireless access point before your wireless network adapters. Please establish

wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to the

added overhead.

1. Log into the web-based configuration by opening a web browser

and entering the IP address of the access point (192.168.0.50). Click

on Setup and then click Wireless Settings on the left side.

Security Mode in the Wireless Security Mode section

WPA-Personal.

WPA Mode in the WPA section, select Auto (WPA or WPA2),

WPA2 Only, or WPA Only. Use Auto if you have wireless clients

using both WPA and WPA2.

Group Key Update Interval

changed.

Pre-Shared Key

both ends of the wireless connection. The passphrase must be between 8-63 characters.

7. Click Save Settings at the top of the window to save your settings. If you are configuring the access point with a wireless

the access point.

D-Link DAP-1560 User Manual

TKIP AES

TKIP and AES.

Table of Contents