Section 3 - Configuration
Wireless Setup Wizard
This Wizard is designed to assist you in connecting your wireless device to your access point. It will guide you through
step-by-step instructions on how to get your wireless device connected.
Enter the Device Name of the AP and click Next to
continue. It is recommended to change the Device
Name if there is more than one D-Link device within
the subnet.
enter a new password and click Next.
Select Auto as the configuration method only if your
wireless device supports Wi-Fi Protected Setup.
Skip to page 18 for Manual configuration.
Click Next to continue.
D-Link DAP-1560 User Manual
16