Table of Contents
Advertisement
Section 3 - Configuration
This section will allow you to change the local network settings of the bridge and to configure the Static settings.
LAN Connection
Use the drop-down menu to select Static IP if you
Type:
(DHCP) to automatically receive an IP address from
your DHCP server or router.
Access Point IP
Enter the IP address you want to assign the bridge.
Address:
Subnet Mask:
Enter the Subnet Mask you want to assign the
bridge.
Default Gateway:
Enter the Gateway you want to assign the bridge.
Device Name:
Enter the Device Name of the AP and click Next to
continue. It is recommended to change the Device
Name if there is more than one D-Link device within
the subnet.
D-Link DAP-1560 User Manual
Network Settings
Static
Dynamic IP
55
Advertisement
Table of Contents
