A&D TM-2441 Instruction Manual page 52

Automated self blood pressure
The ASBP can specify up to six preset start time for the alarm.
When parameters for the ASBP program are stored, the ASBP is
started and the buzzer sounds at each Start time. Press the
switch to perform a "1 scope" when the buzzer sounds.
/
"1 scope" consists of a set of blood pressure measurements and
interval times which are repeated to the number of the measurement
count. The last interval time is omitted.
Manual blood pressure measurement of the ASBP
When the
scope" and next "1 scope", The "1 scope" is performed.
1 scope
T T
Press the
switch to start "1 scope".
Start time of alarm
The ASBP is started at the same time when ASBP program is set.
(The ASBP becomes waiting mode until start time)
1 scope
T T
switch is pressed in waiting mode between last "1
/
Blood pressure measurement
/
1 scope
T T
Press the
to perform the manual-BPM.
Note
Start time of alarm
switch
/
34
ASBP
1 scope
T T
Press the
/
switch to start "1 scope".
1 scope
T
T : Interval time
Time
T
Time