Chapter 2 Supported Application - Cisco UCS Series User Manual

Cisco Video Surveillance Manager, Release 7.11.1 and Higher
See the
Complete the initial server setup.
Step 2
•
•
Use the browser-based Cisco Video Surveillance Management Console to complete the initial server
Step 3
setup for the Cisco Video Surveillance Manager.
See the
Use the browser-based Cisco Video Surveillance Operations Manager to configure additional server
Step 4
options and Cisco VSM features.
See the
Upgrading the Cisco VSM System Software
To to update the Cisco VSM system software, use the browser-based Cisco VSM Operations Manager
or Cisco VSM Management Console to install the upgrade file that contains all required packages and
components.
See the
Recovering the Cisco VSM System Software
To create a bootable USB flash drive that can be used to recover an installation or perform a factory
installation of Cisco VSM 7.
See the
The recovery options include the following:
Table 2-1
Option
recovery
factory
Cisco CSS UCS Platform Series User Guide, KIN-UCSM5-1RU-K9 / KIN-UCSM5-2RU-K9
2-2
Installing the Server, page
KIN-UCSM5-1RU-K9: Initial Serer Setup
KIN-UCSM5-2RU-K9: Initial Server Setup
Cisco Video Surveillance Management Console Administration
Cisco Video Surveillance Operations Manager User
Cisco Video Surveillance Manager: Install and Upgrade Guide
Cisco Video Surveillance Manager: Install and Upgrade Guide
Recovery Options
Description
Reinstalls the operating system.
•
•
Restores the server to the factory default settings:
•
•
•
•
Caution
1-4.
Recorded video is preserved.
RAID configurations are preserved (only the OS partitions are
formatted).
Reinstalls the operating system.
Clears and reconfigures the RAID. You must disconnect any external
storage before using this option.
Recorded video and configurations are deleted.
RAID-6 is configured on the Cisco CSS UCSM5 2RU server.
This action deletes all data and video files.
Chapter 2 Supported Applications
Guide.
Guide.
for your release.
for your release.