Adjusting Menu Options; Picture Control; Accessing Picture Menu; Selecting Picture Options - Sanyo AVL-279 Instruction Manual

Depending on the signal tuned, you may see different MENU options on your screen. As an example, Menus
displayed below are based on TV mode.

Picture Control

Accessing Picture Menu

1.
Press MENU.................
2.
Highlight [Picture].........
Use or button.
3.
Press OK......................
To highlight an option and to change settings, press
Press EXIT to exit.
Selecting Picture
Options
To quickly change the aspect ratio,
press the ZOOM button repeatedly.
Option
Picture Settings
Screen Settings
Aspect Ratio
Color Temperature
Cinemotion
3D Comb Filter
Temporal NR
(Anolog)
RESET PICTURE

Adjusting MENU Options

Picture Picture Settings
Screen Settings
Audio
Aspect Ratio
Color Temperature
Settings
Cinemotion
3D Comb Filter
Channels
Temporal NR
RESET PICTURE
Locks
Guide
. Press OK to confirm the selection or alter the settings.
Description
Select to access a picture adjustment window, see [Adjusting
Picture Settings] on next page.
Select to access a screen adjustment window for VGA or
Component input, see [Adjusting Screen Settings] on next
page.
Select to access a window in which you can choose a proper
aspect ratio for 4:3 or 16:9 program, please refer to the
explanation on the screen when making a choice. Select from
[Normal], [Direct], [Full Screen], [Panoramic], [ZOOM 1]
and [ZOOM 2].
Choose from the following color temperatures:
Cool
Select to give the white colors a blue tint.
Select to give the white colors a neutral tint.
Neutral
Select to give the white colors a red tint.
Warm
Select [ON] to optimize the screen display automatically
detecting film content and applying a reverse 3-2 pull down
process. Moving picture will appear clearer and more natural
looking. Select [OFF] to disable the detection.
Select to provides high quality images with minimal dot
crawl and cross color noise.
Off
Select for normal images
Low Select for lower Mosquito Noise Reduction.
Medium For moderate Mosquito Noise Reduction
For enhanced Mosquito Noise Reduction
High
Select to reduce the noise level of connected equipment. This
also reduces the noise level to the signal from the RF jack.
Select from [Off], [Low], [Medium] and [High].
Select to reset picture settings and adjustments to the
defaults.
ON
28