Related Manuals for Worx WG380
Summary of Contents for Worx WG380
- Page 1 Cordless chain saw Tronçonneuse sans fil Sierra de cadena inalámbrica WG380 WG380.9...
- Page 3 21 20...
- Page 4 REAR HANDLE ON/OFF SWITCH OIL FILLER CAP FRONT HANDLE HAND GUARD GUIDE BAR CHAIN CHAIN TENSIONING KNOB CHAIN COVER 10. BATTERY PACK* 11. BATTERY PACK RELEASE BUTTON* 12. REAR HAND GUARD 13. BUMPER SPIKE 14. OIL LEVEL WINDOW 15. LOCK-OUT BUTTON 16.
-
Page 5: Technical Data
Chain Blade protection cover Charger 1(WA3747) Battery pack 1(WA3580) Only use the appropriate accessories intended for this tool. Accessory information can be found on the product packaging, at a WORX dealer or on our website at www.worx.com. Cordless chain saw... - Page 6 Kink/Plis/Torcimiento EN: Bar / F: Bar ES: Barra de guía 100% Cordless chain saw...
- Page 7 EN: Injecting grease to lubricate F: Injectez la graisse pour lubrifier ES: Inyectando grasa para lubricar Cordless chain saw...
-
Page 8: Product Safety
PRODUCT SAFETY explosive atmospheres, such as in the presence of flammable liquids, gases WARNING: Some dust created by or dust. Power tools create sparks which power sanding, sawing, grinding, may ignite the dust or fumes. drilling and other construction activities c) Keep children and bystanders contains chemicals known to the state away while operating a power tool. - Page 9 Always wear eye protection. Protective d) Store idle power tools out of the reach of children and do not allow equipment such as dust mask, non- persons unfamiliar with the power skid safety shoes, hard hat, or hearing tool or these instructions to operate protection used for appropriate conditions the power tool.
-
Page 10: Chain Saw Safety Warnings
seek medical help. Liquid ejected from the 7. When cutting a limb that is under battery may cause irritation or burns. tension be alert for spring back. When the tension in the wood fibers is released the 6) Service spring loaded limb may strike the operator a) Have your power tool serviced by and/or throw the chain saw out of control. - Page 11 If liquid contacts eyes, additionally chemical burn if mistreated. Replace seek medical help. Liquid ejected from the battery with WORX only. Use of another battery may cause irritation or burns. battery may present a risk of fire or 19) Have servicing performed by a qualified explosion.
- Page 12 SAVE THESE INSTRUCTIONS should begin to fall. If there is any chance Instructions concerning the proper that the tree may not fall in desired direction techniques for basic felling, limbing, and or it may rock back and bind the saw chain, cross-cutting stop cutting before the felling back cut is 1.
- Page 13 Fig.3 When bucking on a slope always stand on the uphill side of the log, as illustrated in Fig.3 Figure 6. When “cutting through” , to maintain complete control release the cutting pressure near the end of the cut without relaxing your Fig.3 grip on the chain saw handles.
- Page 14 SYMBOLS POSITEC Inc. has established To reduce the risk of injury, user a partnership with the RBRC must read instruction manual Corporation to recycle any Positec batteries with the RBRC-call2recycle seal. For environmental protection, please do not discard batteries in the trash.
- Page 15 ● Cutting edges on chain are sharp. Use 2. Place the chain saw on a solid, level surface. protective gloves when handling chain. 3. Use only genuine WORX chains or those ● Maintain proper chain tension always. recommended for guide bar.
-
Page 16: Filling Oil Tank
LUBRICATION oiler is operating fine. If there is no oil pattern, IMPORTANT: The chain saw is not despite a full oil reservoir, contact WORX filled with oil. It is essential to fill customer service agent or WORX approved with oil before use. Never operate the service agent. - Page 17 7) Guide the saw using light pressure and recharging, the battery may be defective, do not put excessive force on the saw, please contact service agent 1-866-354-WORX letting the saw do its work. The motor will (9679) overload and can burn out. It will do the job better and safer at the rate for which it was 5.
-
Page 18: Maintenance And Storage Of Chain Saw
N) center. To locate an authorized service WARNING: When cutting a limb center, visit www.worx.com that is under tension, use extreme 3. Maintain chain saw with care. caution. Be alert for wood springing •... -
Page 19: Sharpening Saw Chain
replacement parts. Inspect guide bar before sharpening chain. A 5. When not in use, always store chain saw worn or damaged guide bar is unsafe. A worn • in a high or locked place, out of children’s reach or damaged guide bar will damage chain. It •... -
Page 20: Troubleshooting Table
Applying too much pressure Applying relatively less pressure while cutting. while cutting Loose connection. Contact service agent 1-866-354- Internal wiring defective. WORX (9679). On/off switch defective. Dry chain No oil in reservoir Refill oil Vent in oil filler cap clogged Clean cap...
Need help?
Do you have a question about the WG380 and is the answer not in the manual?
Questions and answers