Voice Alarm Timer - Sanyo ICR-B35 Instruction Manual

VOICE ALARM TIMER

1. Press the n button to turn the power on.
2. Select the sub-menu "ALARM" of "FOLDE".
(See "SELECTING THE MENU MODE".)
"FOLDE ALARM" appears.
3. Press the n button to return to the original
display mode.
4. Press the c or d button to select the file
number (01/02 or 02/02).
5. Press the m button to record your alarm mes-
sage.
6. Press the n button to stop.
7. Press the TIME/SET button. "OFF" or "ON"
blinks.
8. Press the c or d button to select "ON".
" " or "
9. Press the TIME/SET button. The year display
blinks.
10. Set the timer ON time by using the TIME/SET,
c or d button. (Refer to "Adjusting the
date and time".)
11. Press the MENU button to select the other
folder as desired. (See "SELECTING THE
MENU MODE".)
When the alarm ON time arrives, the voice alarm
will be activated as shown below:
At stop mode:
• Beep 1 time & Voice message (If voice mes-
sage is recorded.)
• Beep 10 times (If no voice message is re-
corded.)
" appears.
-20-