Table of Contents
Advertisement
Before Starting
This unit can play back the CD that has recorded music data,
MP3 files.
•
The file system is ISO9660 Level 1 and Level 2.
•
It would take 30 seconds or more for this unit to read MP3
files depending on its structure.
•
This unit can recognize up to 999 files or folders per disc. The
CD with 1000 files or folders and over is not available to this
unit.
•
MP3 CDs may not be played in the recorded order.
1. Please use the MP3 software with the function that can
record data alphabetically or numerically.
2. Please refrain from making many sub-folders by
preference.
However, some CD-R/RWs cannot be played back depending
on the recording conditions.
Before playing back MP3 files, please read the following.
MP3 CD
•
MP3 files must have the extension letters, ".MP3" or ".mp3".
•
Standard, sampling frequency, and the bit rate:
MPEG-1 Layer 3
44.1kHz, 48kHz
56kbps ~ 320kbps (constant bit rate)
•
The recommended recording setting for a high-quality sound
is 44.1kHz of sampling frequency and 128kbps of constant
bit rate.
LIMITATIONS ON DISPLAY
Available letters for display are the following: numbers of 0
through 9, and capital alphabets of A through Z.
CAUTION:
•
Some MP3 CDs cannot be played back depending on the
recording conditions.
•
The CD has no music data or non-MP3 files cannot be played
back.
•
The WMA files cannot be played back.
•
Customers should also note that permission is required in
order to download MP3 fils and music from the Internet.
SANYO has no right to grant such permission. Permission
should always be sought from the copyright owner.
Important Note:
If "
" appears on the TV screen during operation, the
operation is prohibited by the unit or the disc.
MP3 CD OPERATION
MP3 CD Playback
1. Load the disc with the label facing up on the disc tray.
2. Press [p] or [o] to select the folder or file, and press [ENTER].
3. Repeat step 2 to select the file in the folder, if necessary.
Note:
If the disc is loaded with the label side downward, or if a badly
scratched disc is loaded, "NO DISC" or "NO PLAY" appears on
the TV screen. If this occurs, load the disc correctly or replace the
disc.
Stopping Playback
Press [n] during playback.
"Stop" appears briefly on the TV screen.
-E51-
(Please refer to "Basic Playback" on page E45.)
•
"SmartNAVI" screen appears.
SmartNAVI
0
ROOT
1
DIR_S001
2
DIR_S002
3
DIR_S003
4
MUSIC001
5
MUSIC002
6
MUSIC003
Enter
•
If the folder is selected, the file menu of the selected
folder appears.
•
If the file is selected, the selected file playback starts
("Play" appears briefly on the TV screen).
•
Number buttons can be used for selecting the file.
Examples:
To select No.3, Press [3].
To select No.10, press [+10], then [0].
To select No.24, press [+10], [+10], then [4].
Need help? Call
1-800-813-3435
Hide quick links:
Advertisement
Table of Contents
