System Setting; V-Mode; Display - Sanyo DVD-DX405 Instruction Manual

DVD-DX405(K501)CA (GB) 2006.6.19 1:24 PM ˘ ` 16
BASIC OPERATIONS

SYSTEM SETTING

According to the system of the TV to be connected, set the system of the unit to
make it match the TV.
Press SYSTEM button on the remote control, then choose TV TYPE.
• When you press the [SYSTEM] button, the TV screen shows

V-MODE

• When connecting to your TV's component video inputs, press
the V-MODE on the remote control to select INTERLACE or
PROGRESSIVE.
When you press the [V-MODE] button, the TV screen shows the
information as : "If you want to change, press [V-MODE] again."
Press the [V-MODE] button again to change the video mode.
If you connect to Composite (basic A/V) inputs after
selecting one of the 2 above option, picture is not
displayed. Press the V-MODE on the remote control to
select Composite video.

DISPLAY

Each time you press the "DISPLAY" button when playing a disc, the TV screen shows
the information as :
DVD
Title Elapsed
Chapter Remain
CD
Single Elapsed
MP3
Folder
16
the information as : "If you want to change, press
[SYSTEM] again." Press the [SYSTEM] button again, the
video out system changes as follows.
PAL
AUTO
(WHEN SELECTING INTERLACE or PROGRESSIVE)
Title Remain
Display Off
Single Remain
NTSC
DISPLAY
Chapter Elapsed
Total Elapsed Total Remain
SYSTEM
V-MODE
Display Off