After Using The Camera In Water - Sanyo Xacti VPC-E2 Instruction Manual

AFTER USING THE CAMERA IN WATER

After using the camera in water, wash it with fresh water and dry it completely.
1
Turn off the camera, and close the battery/card compartment cover
securely.
2
Wash the camera with fresh water.
h Fill a shallow basin with fresh water, and immerse the closed camera for
about 5 minutes. Rotate the monitor unit several times to clean it
completely.
3
Allow the water to drain out through the drainage holes.
h Drain the water through the five drainage holes.
Monitor unit
Drainage hole
67
English
Monitor unit
Drainage hole
Drainage hole