Checking The Remaining Battery Pack Charge - Sanyo Xacti VPC-E2 Instruction Manual

CHECKING THE REMAINING
BATTERY PACK CHARGE
When using the battery pack, the remaining battery pack charge can be
checked on the monitor. Make sure to check this indicator before capturing an
image. For an indication of the possible length of time for battery pack
operation, see page 188.
1
Display the Shooting Menu or
Playback Menu (page 37).
h The battery pack remaining
charge indicator appears in the
lower right corner of the monitor.
h Due to the battery pack
characteristics, when the ambient
temperature is low,
appear early for an incorrect
indication of the remaining
charge.
Also, depending on the conditions
of use of the camera or the
ambient conditions (temperature,
etc.), the indicated remaining
charge may change. Therefore,
this indication can only be used
as a general approximation of the
remaining charge.
Battery pack
remaining
charge indicator
No indication, or
153
English
may
Battery remaining charge
Approx. full.
Power is low.
It will soon be impossible to capture or play
back images.
If this icon flashes when the [
[ ] button is pressed, images cannot be
captured. Recharge the battery pack.
1
2
3
Switch to
1
simple menu
2
3
S S
EXIT
N N
Battery pack remaining
charge indicator
] button or
OK