Install The Card - Sanyo Xacti VPC-E2 Instruction Manual

Install the card

The card can be used after it has been formatted with the camera
(page 148).
1
Open the battery/card
compartment cover.
2
Insert the card.
h Firmly insert the card until it
clicks into place.
3
Close the battery/card compartment cover.
<When removing the card...>
h To remove the card, press it
down, and then release. The
card will protrude slightly, and
you can then pull it out.
Card slot
1 Open
2 Insert
1 Open
2 Push
3 Pull out
English
28