Troubleshooting; Camera - Sanyo Xacti VPC-E2 Instruction Manual

TROUBLESHOOTING

Before taking your camera to the repair shop, check the following table for a
possible solution to the problem.

Camera

Problem
No power.
Power
A blinking
temperature
warning icon
\ is shown,
and the
camera does
not turn on.
The camera
turns off by
itself.
An image is
not captured
when the
[
[
Shooting pressed.
Cause
The battery
pack is dead.
The battery
pack has not
been inserted
correctly.
The battery
pack is too hot.
The power
save function
is operating.
The power is
not turned on.
] button or
] button is
Reference
Action
Recharge the
battery pack, or
replace with a
new battery
pack.
Reinsert the
battery pack,
making sure to
orient it
correctly.
Wait for the
battery pack to
cool down.
Turn on the
camera again.
If the power
save function
was activated,
turn on the
camera before
shooting.
If the camera
was turned off,
press the ON/
OFF button to
turn it on.
English
page
23, 25
29
30
30
172