Table of Contents
Advertisement
21
Unboxing and setup
Charging the battery
Before you turn on and start using HTC EXODUS 1, it is recommended that you charge the battery.
§ If the battery has been fully drained, you may need to charge HTC EXODUS 1 for several
minutes before powering it on.
§ Use HTC's power adapter and USB Type-C cable to charge the battery. When the battery power
is too low, make sure to use the power adapter to charge, not the USB cable connection with
your computer.
1. Insert the small end of the USB Type-C cable into the USB Type-C connector.
2. Insert the other end of the USB Type-C cable into the power adapter.
3. Plug in the power adapter to an electrical outlet to start charging the battery.
4. After you finish charging, unplug the USB cable from your phone first. Hold the part of the
power adapter that's close to the USB port when you unplug the adapter from the outlet.
§ Avoid charging the battery in hot environments. As a safety precaution, the battery may stop
charging to avoid overheating.
§ When you're using battery-intensive apps such as games or video streaming apps while charging
the battery, your phone may become warmer. This is normal.
§ It is strongly recommended to unplug the power adapter from the electrical outlet when not in
use.
Switching the power on or off
Switching the power on
Press the POWER button until HTC EXODUS 1 vibrates.
When you turn on HTC EXODUS 1 for the first time, you'll need to set it up.
HTC EXODUS 1 has a pressure-sensitive POWER button. For details, see
pressure-sensitive buttons
on page 36.
Do's and don'ts with
Advertisement
Table of Contents
