Champion EASYBIRD 40913 Instruction Manual page 11

2. EASYBIRD Auto-Feed Trap
WARNING! MAKE SURE THE OSCILLATING BASE "ON-OFF" SWITCH ON
OSCILLATING BASE POWER CORD IS SET TO THE "OFF" POSITION BEFORE
CONNECTING POWER TO THE OSCILLATING BASE.
1. Connect the oscillating base power cord to the battery first. Connect the red battery lead to
the positive (+) terminal and the black battery lead to the negative (-) terminal of an
adequately charged deep cycle 12V battery.
WARNING! MAKE SURE THAT THE "ON-OFF-SAFE RELEASE" SWITCH IS SET TO THE
"OFF" POSITION BEFORE CONNECTING POWER TO THE TRAP.
2. Connect the EASYBIRD Auto-Feed trap to the battery second. Connect the red battery lead
to the positive (+) terminal and the black battery lead to the negative (-) terminal.
Oscillating Base
Power Cord
If you require parts or service assistance, please call the CHAMPION TRAPS & TARGETS Customer Service Dept.
at (800) 379-1732
©2015 CHAMPION TRAPS & TARGETS, Anoka, MN 55303
9