Battery And Power Connection - Champion EASYBIRD 40913 Instruction Manual

4. Battery and Power Connection

1. EASYBIRD 6-Packer Trap
WARNING! MAKE SURE THE OSCILLATING BASE "ON-OFF-JOG" SWITCH ON THE
BACK OF THE 6-PACKER IS SET TO THE "OFF" POSITION AND THE TRAP "ON-
OFF-SAFE RELEASE" SWITCH ON THE BACK OF THE 6-PACKER IS SET TO THE
"OFF" POSITION BEFORE CONNECTING THE OSCILLATING BASE POWER CORD.
1. Unplug the power switch / battery clips cord from the oscillating base power cord, if they
are included, and save this cord for future use.
2. Plug the oscillating base power cord directly into the matching connector on the bottom rear
of the 6-Packer trap.
WARNING! MAKE SURE THAT THE "ON-OFF-SAFE RELEASE" SWITCH IS SET TO
THE "OFF" POSITION BEFORE CONNECTING POWER TO THE TRAP.
3. Connect the red battery lead to the positive (+) terminal and the black battery lead to the
negative (-) terminal of an adequately charged deep cycle 12V battery.
8
If you require parts or service assistance, please call the CHAMPION TRAPS & TARGETS Customer Service Dept.
Oscillating Base
Power Cord
at (800) 379-1732
©2015 CHAMPION TRAPS & TARGETS, Anoka, MN 55303
Remote Release
Cord