Image Level Selection - Sanyo PLC-XU70 Owner's Manual

Computer Input

Image Level Selection

Direct Operation
Select an image level among Dynamic, Standard, Real,
Blackboard(Green), Image 1, Image 2, Image 3, and Image 4
by pressing the IMAGE button on the remote control.
Dynamic
Picture level suitable for viewing picture in a bright room.
Standard
Normal picture level preset on this projector.
Real
Picture level with improved halftone for graphics.
Blackboard(Green)
Picture level suitable for the image projected on a
blackboard.
This mode assists to enhance the image projected on a
blackboard. This is mainly effective on a green colored
board, not truly effective on a black colored board.
Image 1~4
User preset image in the Image Adjust Menu (p32).
Menu Operation
1 Press the MENU button to display the On-Screen
Menu. Press the Point
framed pointer to the Image Select Menu icon.
2 Press the Point
pointer to the level that you want to set and then press
the SELECT button.
Dynamic
Picture level suitable for viewing picture in a bright room.
Standard
Normal picture level preset on this projector.
Real
Picture level with improved halftone for graphics.
Blackboard(Green)
Picture level suitable for the image projected on a
blackboard. See above for further description.
Image 1~4
User preset image in the Image Adjust Menu (p32).
30
buttons to move the red
7 8
buttons to move the red framed
ed
Remote Control
IMAGE
button
Image Select Menu icon
Image Select Menu
Move the red framed pointer
to the level and press the
SELECT button.
The level being selected.
IMAGE button
Dynamic
Standard
Real
Blackboard (Green)
Image 1
Image 2
Image 3
Image 4