Troubleshooting - Sanyo DS31520 Owner's Manual

TROUBLESHOOTING (Continued)
Press the TV key
on the Remote
Control. Then try it
again. Be sure to
point the remote
control at the TV.
Press the appro-
priate key: VCR,
CABLE, DVD, or
SAT, key on the
Remote Control.
Then try it again.
(Make sure the
equipment is
turned on.)
This is a normal condition during the warm-up and cool down of the plastic cabinet parts.
Does the remote control work now?
Yes. Another mode was selected. Press the appropriate key to operate the different
types of equipment. (Remote must be programmed. See pages 7~9.)
No. Replace the batteries or confirm that they are properly installed.
Does the remote control operate the equipment now?
Yes. Another mode was selected. Press the appropriate button to operate the
different types of equipment. (Remote must be programmed. See pages 7~9.)
No. Reprogram the remote control.