Advertisement
Tigertop™ – Installation Instructions
Install Door Strike
If a hard door strike is present, it must be removed.
Close the door against the body and locate the
Door Strike behind the Paddle Handle Latch. Mark
the center of the slots in the Door Strikes. Center
punch and drill two 3/16 inch holes. Secure the
Door Strikes with two #14 Sheet Metal Screws. The
Door Strikes may be adjusted in or out until you are
satisfi ed with the way the door shuts and opens.
Tighten the machine screws on the Paddle Handle
and trim any excess fabric from around the Paddle
Handles. Leave 1/4 inch of fabric around the inside
of the Paddle Handle.
Some vehicles will use the existing holes
and bolts from the hard door strike.
Screws
Rev. E 0207
Door Strike
When operating the
vehicle with the rear
window open, one or
more door windows should be open for proper
ventilation.
Adjusting the Top
Rear Curtain
To roll up the Rear Curtain, start at the bottom and
roll it to the inside. Avoid wrinkles in the fabric and
window. Secure it in place with the curtain strap
inside of the top.
Detail of Rear
Curtain
Strap
Curtain Up
Rear
Window
Fabric
Curtain Down
Side View
51443 pg. 9
Advertisement
