Download Print this page

Bestop Tigertop Installation Instructions Manual page 10

Soft top

Advertisement

Tigertop™ – Installation Instructions
Adjusting the Top
Side Curtain
To roll up the Side Curtains, fold the bottom rear
corner of the panel forward and roll the curtain to
the outside. Avoid wrinkles in the fabric and the win-
dows. Secure the curtain in place with the curtain
straps inside the top.
Rev. E 0207
Folding the Top Down
Unsnap the Rear and Side Curtains and unzip
the Rear Curtain zippers. Fold the Side Cur-
tains along the seam and up over the top. Fold
the Rear Curtain up over the Side Curtains.
Unfasten the hook and loop fasteners around
the Vertical Retainer and the Horizontal Rod.
Release the locking tabs on the bow releases
from the holes in the Front Bow and slide the
Rear Bow down to the Bow Mounts. Insert the
bow release tab into the hole on the Front Bow,
just above the Bow Mount. Remove the Verti-
cal Retainer and the Horizontal Rod from their
Second
Fold
mounts and pivot the Front Bow to the rear of
the vehicle until it makes contact with the Rear
Bow.
First
Fold
Unfasten the top from the Windshield Retainer
and lay the top down on the body. Fold the top
in half from front to back and continue folding
until the top is about one foot wide at the rear of
the vehicle. The Buckle Strap assemblies may
be used to secure the top to the bow assembly.
Secure the Vertical Retainers and the Hori-
zontal Rods by snapping each of the Bow Tie
Down Straps to a body stud.
51443 pg. 10

Advertisement

loading