5. Remove the protective paper
Note
Do not touch the adhesive surface with your fingers.
6. Install the holder
7. Press for 15 s.
Close Up
No close up
7.4.5
Replace Junction Box
Requirements
Required Conditions
1. The junction box is defective.
Required Persons
1 Maintainer
Support Equipment
No support equipment
Consumables, Materials and Expendables
No consumables, materials and expendables
Spares
Box, junction
Safety Conditions
Edition:003
(Fig.
16/4) exactly to the marked center of the glass pane.
CAUTION!
Hazard due to premature strain of the adhesive bond
Risk of material damage
•
Do not strain the adhesive bond during the first 24 hours excessively.
WARNING!
Danger due to nonadherence to safety instructions
Risk of death or serious injury and material damage
•
Observe all general safety instructions.
•
Observe all safety instructions for maintenance.
(Fig.
16/3) from the adhesive rings.
1.0 h
04-0000 02
41
Magnetic Sonde
7 Installation and Maintenance
1 EA
4423