Table of Contents
Advertisement
Intelligent Valve Monitor
Maneuvre Counter
The sensor has a maneuvre counter that works as a maintenance diagnostic, since it allows the user to
schedule preventive maintenance for example when the valve reach the 500 full cycles (opening and closing the
valve). You can view the number of maneuvers via software, in bits 2 and 3 input or there is the possibility of
generating an alarm (via logic programming), warning that should be taken to maintain the valve.
0 to 499 Maneuvres
Above 50.000 Maneuvres
Note: Whenever valve maintenance is performed, the output bit 1 should be activated for at least 1 second to
reset the cycle count.
Input and Output Bits Table:
Bit 0
Sensor 1
IMPORTANT!
On the trigger mounting and the control logic
attention should be paid because the sensor 2
should be activated together with the solenoid
command.
Bit 0
solenoid
Energy Savings and Solenoid Increased Life Span:
If the solenoid remains activated for more than 1 minute and 30 seconds, the sensor will automatically reduce its
energy-saving voltage source and increasing the life of the solenoid.
Sense
500 to 4.999 Maneuvres
Input Bits
Bit 1
Sensor 2
Parametre 1
Output Bitsa
Bit 1
Maneuvre counter and
intelligent function reset
Reset Function
Bit 2
Bit 3
Parametre 2
0
0
1
1
Bit 2
Enables intelligent function
5.000 to 49.999Maneuvres
No. of
Maneuvres
0
0 to 499
1
500 to 4.999
5.000 to
0
49.999
above
1
50.000
Bit 3
not used
9
Advertisement
Table of Contents
