Station Mode (Access Point) - Quark-Elec QK-A032 Manual

Quark-elec Manual

5.2. Station mode (access point)

QK-A032 can also be connected in Station mode by changing these parameters to those of your
Wireless Access Point as illustrated below:
The Configuration Software (GUI) can be used to adjust these settings; including NMEA input/output,
baud rates and WiFi settings. You can download the software here:
https://quark-Elec.com/doc/QE_MUX_configTool.zip
Detailed instructions on how to use the Configuration software are available here:
https://www.quark-Elec.com/doc/QK-A0xx_GUI_application_note.pdf
https://www.quark-elec.com
V1.0
Fig 9: Station mode settings
Fig 10: Station mode connection
10 of 19 2018