Setting Up Screen Call - Sanyo SCP-2300 User Manual

Setting Up Screen Call

This feature enables you to answer incoming calls by using pre-
recorded announcements, either one that is pre-recorded or one
that you record. You can also record the caller's message into the
Voice Memo list. To listen to the message, see "Reviewing Voice
Memos"on page 87.
Activating Screen Call
To start Screen Call when you have incoming calls:
1. When the phone rings or vibrates, press
softkey) to display the options.
2. Highlight Screen Call and press
To set Auto Screen Call:
1. Press
to access the main menu.
2. Highlight Tools/Extras and press
3. Highlight Voice Services and press
4. Highlight Screen Call and press
5. Highlight Auto and press
6. Highlight On and press
If you want to change the answer time, enter your desired
number (from 1 to 10 seconds) by using numeric keys or the
navigation key up or down.
7. Press
or
Standby display.
Tip:
If a new caller's message is waiting,
memos recorded while activating "Screen Call" are shown with " " or
" " icon in the list. (" ": once played, " ": not played yet)
Tip:
While the caller is recording: Pressing
disconnects the call. Pressing
.
(left softkey). The
OK
Options
.
.
.
.
.
icon is displayed on the
appears on the display. The
stops recording and
answers the call.
(right
89