Using Speed Dialing - Sanyo MM-8300 Phone Manual

Using Speed Dialing

With this feature, you can dial your favorite entries using
one key press for locations 2-9. (See "Assigning Speed Dial
Numbers" on page 125.)
To use speed dial for voice calls:
From standby mode, press and hold the appropriate
key for approximately two seconds.
– or –
From standby mode, press the appropriate key and
press
The display confirms that the number has been dialed
when it shows "Connecting...".
To use speed dial for Sprint PCS Ready Link calls:
From standby mode, press the appropriate key and
press
Sprint PCS Ready Link Entries" on page 227.)
The display confirms that the number has been dialed
when it shows "R-Link calling...".
Note:
Speed dialing is not available when you are roaming; when you are
roaming off the Sprint Nationwide PCS Network, you must always dial
using eleven digits (1 + area code + number).
Section 2A: Your Sprint PCS Phone – The Basics
or .
. (See "Assigning Speed Dialing for
41