Inserting Or Replacing The Batteries - ReliOn Premier VOICE User Manual

Inserting or Replacing the Batteries

• The ReliOn™ Premier Voice Meter uses two AAA alkaline
batteries.
• Before using the meter, check the battery compartment and
insert batteries if empty.
• When the
is in use, the batteries should be replaced as soon as possible.
• Test results may not be saved if the batteries run out completely.
Step 1
Make sure the meter is turned off. Press
firmly on the battery cover and slide in
the direction of the arrow. Then swing
it open.
Step 2
Remove the used batteries and insert
the two new batteries. Close the battery
cover firmly.
NOTE
• Removing the meter batteries will not
affect your stored results. However,
meter setting may need to be reset,
see page 14.
symbol appears on the display while the meter
9