Sanyo MCD-UB685M Instruction Manual page 14

MP3 CD Play
1. Load the MP3 CD. (See page 10)
The total number of folders of the MP3 CD
appears on the display.
FOLDER
2. Press the PLAY/PAUSE i button to start
playback.
3. Press the MEMORY/FOLDER button,
"FOLDER" blinks on the display, then press
the f/FILE- or FILE+/e button to select
the desired folder.
4. When the first file number of selected folder
appears press the f/FILE- or FILE+/e
button to select a desired file and playback start
automatically.
MP3
5. Press the STOP n button at any time to stop
the playback.
Note:
- If there is no music data, "no" appears.
- Only select the folder in playing mode.
PROGRAMMED PLAY
Up to 20 files on a disc can be programmed for
play in any order.
- To begin the programming procedure, set
function switch to "CD/USB/SD" first.
- The same file can be programmed more than
once.
- Load a disc that you want to programme before
starting programmed play.
1. Press the STOP n button if necessary.
2. Press the MEMORY/FOLDER button, the "P01"
a n d " M E M O R Y " a p p e a r b r i e f l y t h e n
" " appears and "MEMORY" blinks.
3. Select a file by using the f/FILE- or FILE+/e
button.
13
685XEEn.indd 13
MEMORY
MEMORY
4. Press the MEMORY/FOLDER button, the
"P02" and "MEMORY" appear briefly then
" " appears and "MEMORY" blinks.
5. Repeat steps 3-4 to programme additional
tracks.
6. Press the PLAY/PAUSE i button to start
playback. "MEMORY" remains lit.
MP3
7. Press the STOP n button to stop programme
playback at any time.
To cancel programmed play, press the STOP n
button twice during play.
Checking the programme
In stop mode when MEMORY remains lit press
the MEMORY/FOLDER button repeatedly,
the programmed details sequentially appear
on the display.
Changing a programme
To add a new file to a programme:
1. In the stop mode, press the MEMORY/FOLD-
ER button repeatedly until last programme
number is displayed.
2. Select a file as explained above.
3. Press the MEMORY/FOLDER button.
To change a file:
1. In the stop mode, press the MEMORY/FOLD-
ER button repeatedly until the file number to
be replaced is displayed.
2. Select a file as explained above.
3. Press the MEMORY/FOLDER button.
Note:
Programmed details cannot be partially deleted
or inserted.
MEMORY
2008.7.23 8:39:19 AM