Sanyo CDP-M303 Instruction Manual page 10

17
INTRO SCAN MODE
In stop mode or playing mode, press MODE
fourth, " " flashes on the display.
MP3
RANDOM PLAY
In STOP or PLAY mode, press MODE
five times, and " " flashes on
the display.
MP3
SEARCHING SONGS
During MP3 play, songs can be selected by title, as follows:
Ê
In STOP mode, press and hold MODE for a few seconds until "
displayed.
Ë
The letter " " will then appear. Press SKIP/SEARCH (
the letter or symbol.
Ì
Press MODE to confirm the selected letter or symbol.
Í
Another letter appears. Continue to select and confirm.
Î
Press STOP to return to the last letter.
Ï
After the selection is made, press PLAY/PAUSE to play the selected songs.
Ð
If a song is not found, " " will appear briefly; this will then change
to " " .
Ñ
To return to normal playback, press "
PLAY/PAUSE to resume play.
Note: A maximum of 10 characters can be inputted. If more than one song
matches the first 10 characters, it will select the first song.
MP3
Press PLAY/PAUSE again to begin
playing brief introductions to the
tracks.
Press PLAY/PAUSE again to begin
playing the tracks in random order.
" is
or ) to select
" for a few seconds, and then press
MP3
RECORDING FROM THE LINE OUT JACK
* The output from the CD player can be
easily recorded.
Connect a patch cable (not supplied)
from the LINE OUT jack on the CD
player to the LINE INPUT jacks on a
cassette or other recorder.
TO LINE OUT JACK
CLEANING
CLEANING THE PICKUP LENS
Dust on the pickup lens can lead to erratic
operation and interruption of the sound
during play.
*
To clean the pickup lens, open the disc
compartment. Blow the dust off of the
lens using a camera lens blower
(available at most camera stores). Do
not touch the surface of the lens.
18
* The sound from the CD can be heard
through a pair of speakers.
Connect a patch cable ( not supplied )
from the LINE OUT jack on the CD
player to the AUX or CD INPUT jacks on
a stereo system.
CLEANING THE CABINET
Use a soft cloth moistened with plain
lukewarm water and wrung dry. Never
use benzol, benzene or other strong
chemical cleaners, since these could
damage the finish. It is important that no
liquid reaches the inside of the unit.
IB03742-CDM32A-60F8-(AVID 2363 IC)-SANYO-E
AVID 2363 IC
04-17-03