Playing An Mp3 Disc; Repeat Play Function - Sanyo CDP-M303 Instruction Manual

13

PLAYING AN MP3 DISC

Thank-you for choosing the Sanyo CDP-M303, CD/MP3 player. Please take a
moment to read this instruction booklet so you will become familiar with the many
features of this unit.
Note: Because an MP3 disc has a large capacity, the disc-reading time will be
longer.
Switch on the power, open the CD door, put the disc inside the unit correctly and
close the CD door.
Press PLAY/PAUSE, and READING appears on the screen. The disc is read in the
following order:
Begin to read disc
MP3
Catalog 2 Track Number Total Catalogs'
number
(including the
tracks of the
previous catalog)
As the diagram above illustrates, the display will show the track number in the
context of the entire disc regardless which catalog or album is being played. As
an example, if an MP3 disc has 14 catalogs and 156 tracks in total, and catalog 1
has 16 tracks and catalog 2 has 14 tracks, track 26 in catalog 2 would show in the
display (as in diagram above).
Instructions for PLAY/PAUSE, STOP/POWER OFF, FORWARD/BACKWARD, etc.,
are the same for MP3 discs as for CD discs.
NOTE: Because of the anti-skip mechanism, the CD stores 120 seconds of play
into memory. Therefore, the CD will stop spinning occasionally; listening will not
be interrupted.
MP3
Catalog 1 Track number
Album name
MP3 MP3
Total tracks' The 1st track
number starts playing
Information of
the current track
SINGLE TRACK REPEAT
During playback, press the MODE
button once to repeat the track that is
playing." " will appear.
REPEAT ALL TRACKS IN CATALOG
During playback, press the MODE
button twice to repeat all of the tracks
in the current catalogue. "
appear on the display.
ESP
signal

REPEAT PLAY FUNCTION

REPEAT ALL
During playback, press the MODE
button three times, and the entire disc
will be repeated. "
on the display.
" will
14
" will appear