Supported Switches; Safety Instructions And Warnings - NETGEAR GS105Ev2 User Manual

Supported Switches

The Gigabit Ethernet Smart Managed Plus Switches User Manual describes the following
switch models:
• GS105Ev2
• GS105PE
• GS108Ev3
• GS108PEv3
• GS116Ev2
• JGS516PE
• JGS524Ev2
• JGS524PE
Note: Smart Managed Plus Switches used to be called Web Managed (Plus) Switches.

Safety Instructions and Warnings

Use the following safety guidelines to ensure your own personal safety and to help
protect your system from potential damage.
To reduce the risk of bodily injury, electrical shock, fire, and damage to the equipment,
observe the following precautions:
• This product is designed for indoor use only in a temperature-controlled and
humidity-controlled environment. For more information, see the environmental
specifications in the appendix or the data sheet.
Any device that is located outdoors and connected to this product must be properly
grounded and surge protected.
Failure to follow these guidelines can result in damage to your NETGEAR product,
which might not be covered by NETGEAR's warranty, to the extent permissible by
applicable law.
• Observe and follow service markings:
- Do not service any product except as explained in your system documentation.
Some devices should never be opened.
- If applicable to your device, opening or removing covers that are marked with
the triangular symbol with a lightning bolt can expose you to electrical shock.
Get Started
Gigabit Ethernet Smart Managed Plus Switches
7 User Manual