NETGEAR GS105Ev2 User Manual page 3

Revision History
Publication Publish Date
Part Number
202-11700-04 October 2018
202-11700-03 October 2018
202-11700-02 March 2017
202-11700-01 August 2016
Gigabit Ethernet Smart Managed Plus Switches
Comments
Added a note to Manage Access Control on page 58 to state that models GS108Ev3
and GS108PEv3 do not support access control.
• Changed the manual name from ProSAFE Gigabit Web Managed (Plus) Switches User
Manual to Gigabit Ethernet Smart Managed Plus Switches User Manual.
• Added Safety Instructions and Warnings on page 7.
• Revised Configure the Switch on page 9.
• Revised Access a Switch That Is Connected to a Network on page 10.
• Revised Install the ProSAFE Plus Utility on page 13.
• Added Use the NETGEAR Switch Discovery Tool to Access the Switch on page 15.
• Added Use the NETGEAR Insight Mobile App to Discover the Switch on page 16.
• Added Change the Language on page 17, including Change the Language of the
Local Browser Interface on page 18 and Change the Language for the Local Browser
Interface by Installing Another Firmware Version on page 18.
• Added Manage Access Control on page 58 including Add Devices to the Access
Control Table on page 58 and Remove Devices From the Access Control Table on
page 59.
• Added PoE Considerations for Switches That Support PoE on page 63.
• Added PoE Troubleshooting Suggestions on page 67.
• Removed references to the resource CD.
• Made multiple minor changes.
Made corrections to Specify a Port PVID for an 802.1Q-Based VLAN on page 30.
First publication.
3