Predator VX360 Owner's Manual page 17

Product Setup
17
Setting up the Arm Strap
The VX360 Control Case with inserted PVR can be worn on the upper arm to enable you to carry
it whilst keeping your hands free for other activities. The arm strap in conjunction with the strap
mounting bracket allows for the control case to be attached and removed from the arm without
the need for detaching the arm strap or mounting bracket at the same time.
The VX360 video control buttons are easily accessible if the arm strap and mounting bracket are
attached to the left upper arm.
To attach the strap mounting bracket to the arm strap use the diagram provided and follow the
instructions given below:
o
Ensure that the fastening tape surface on the arm strap is facing upwards and the mounting
bracket is also facing upwards with the protruding catch facing towards you
o
Insert the curved end of the strap down through the slot between the metal pin and the body
of the bracket in the direction of the arrow shown in the diagram
o
Push the strap up and through the other gap on the opposite side of the mounting bracket and
feed the arm strap through the slots on the mounting bracket
o
Finish by feeding the protruding webbing tag through the mounting bracket slots until it
appears out from the second slot
o
The D-ring on the arm strap and approximately 50mm (2 inches) of webbing should be left
protruding from the left hand side of the bracket.