Administration Settings
Remote Management
STEP 1
STEP 2
STEP 3
STEP 4
SRP 521 VoIP Gateway Administration Guide
REVIEW DRAFT — CISCO CONFIDENTIAL
Field
Connection Request
Username
Connection Request
Password
Periodic Inform
Interval
Periodic Inform
Enable
Request Download
SNMP
SNMP is a popular network monitoring and management protocol.
Click Administration on the tab and then click Remote Management in the
navigation pane. Click SNMP. The SNMP page appears.
Click Enabled to enable SNMP.
Choose a trusted IP setting.
Click Submit to save your settings.
Description
Connection request username. This should be the same
as configured at ACS side.
Connection request password.This should be the same
as configured at ACS side.
The periodic inform interval. The default value is 86400
seconds.
To enable or disable periodic inform.
If applied, ACS may call the Download RPC after it
receives the request from CPE.
7
91