4
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
STEP 8
STEP 9
54
Field
Application Name
WAN Interface
Name
Start-End Port
Protocol
IP Address
Enable
Port Range Triggering
The settings for Port Range Triggering are set on this page. It shows the current
port range triggering list and details of the selected port range.
Click Network Setup on the tab and then click NAT in the navigation pane. Click
Port Range Triggering. The Port Range Triggering page appears.
Click Add Rule. The Port Range Triggering page opens.
Enter a name of the application.
Select a WAN interface.
Select a LAN interface
Enter a triggered port range.
Enter a forwarded port range.
Click Enabled to enable the applications you have defined.
Click Submit to save your settings.
Description
The name of the application.
List of WAN interface.
The number or range of port(s) used by the server or
Internet application. Check with the Internet application
documentation for more information.
Select the protocol TCP or UDP, or Both.
The IP address of the server that you want the Internet
users to be able to access.
Click Enabled to enable the applications you have
defined. This feature is disabled (unchecked) by default.
Configuring the Network
SRP 521 VoIP Gateway Administration Guide
NAT