Table of Contents
Advertisement
Setting up the Interfaces of the Gateway
Setting up the Wireless LAN
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
SRP 521 VoIP Gateway Administration Guide
REVIEW DRAFT — CISCO CONFIDENTIAL
Wireless Security
The Wireless Security page configures the security of your wireless network(s).
The gateway supports the following wireless security mode options: WPA
Personal, WPA Enterprise, WPA2 Personal, WPA2 Enterprise, RADIUS and WEP.
(WPA stands for Wi-Fi Protected Access, which is a security standard stronger
than WEP encryption. WEP stands for Wired Equivalent Privacy.)
Click Interface Setup on the tab and then click WiFi Setting in the navigation pane.
Click Wireless Security. The Wireless Security page appears.
From the Select a SSID menu, choose the SSID for the wireless network that you
want to configure.
Select the security method for your wireless network. If you do not want to use
wireless security, use the default setting, Disabled (not recommended).
If you selected a security mode, fill in the fields for the security mode that you
chose.
Click Submit to save your settings.
Field
Select a SSID
Description
The SSID to which the securithy setting is applied. The
default is SSID1.
3
35
Advertisement
Table of Contents
