Sanyo DSR-C100 Instruction Manual page 11

Monitor display
4
<ALARM REC FULL> <ALARM REC FULL> <ALARM REC FULL>
SYSTEM SYSTEM SYSTEM
ERROR ERROR ERROR
LOW BATT LOW BATT LOW BATT
7 5
NO BATT
Note: If you do not need the caution indicator to operate (lighting or flashing), you can set it to remain off
at all times by setting CAUTION LED to "OFF" in the SYSTEM SET screen.
However, the ö mark indicates times when the caution indicator flashes regardless of the CAUTION
LED setting.
Warning indicator
Warning
6
HDD WARN HDD WARN HDD WARN
Fast
flashes
Indicator
Caution Caution
(ON) (OFF)
Fast
Off
flashes
10
Caution indicator
Camera status
4 When there is 20 minutes or less of
recording time remaining in the
post-alarm recording area, or
When post-alarm 2 recording is
complete (suspicion recording
possible)
5 When there is a problem with the
camera hardware (recording is not
possible)
6 When there is a problem with the
hard disk (recording is not possible)
7 When Ni-Cd battery is not installed
or not connected (NO BATT)
When there is a problem with the
Ni-Cd battery (LOW BATT)
When time setting has not been
carried out
During hard disk initialization (ö)
During memory card initialization
English