Warning Displays - Sanyo DSR-C100 Instruction Manual

WARNING DISPLAYS

There is a caution indicator and a warning indicator on the front and back of the camera. These indicators
operate to notify you of the operating status of the camera and of any cautions and warnings. In addition,
text messages indicating warnings are also displayed on the monitor screen in conjunction with the flashing
speed of the indicators.
A separate indicator can be connected to the WARNING terminal to let you check the same warning statuses
as shown by the built-in warning indicator.
If the warning indicator continues flashing, it indicates that there is a problem with the camera.
If this happens, maintain the camera in the same status and contact the place of purchase.
Monitor display
1
PRE2 ALARM-REC PRE2 ALARM-REC PRE2 ALARM-REC
FUN WARN FUN WARN FUN WARN
<SUSPICION REC FULL> <SUSPICION REC FULL> <SUSPICION REC FULL>
2 3
English
Indicator
Caution
Warning
(ON)
Off Off
Lights Lights
Lights Fast
flashes
Slow
Lights
flashes
Slow Slow
flashes flashes
9
Caution
(OFF)
Off Hard disk at standby
When MAIN MENU screen displayed
When SETTINGS screen displayed
Off
During playback
During pre-alarm or post-alarm
recording
Off During suspicion recording
1 When post-alarm recording is
complete and pre-alarm 2
recording has started (suspicion
Off
recording possible)
2 When the cooling fan has stopped
(alarm/suspicion recording possible)
3 When suspicion recording is
complete (alarm recording possible)
When computer connected
Off
When computer connected
(during data transmission) (ö)
Camera status