Post-Alarm Recording - Sanyo DSR-C100 Instruction Manual

SETTING THE RECORDING METHOD

Post-alarm recording

1
Press the MENU button.
The MAIN MENU screen will be displayed.
2
Use the CURSOR (j or l) button to select
"RECORD START" and then press the SET button.
The warning indicator and caution
indicator both light during post-alarm
recording.
"PRE1-ALARM REC" will be displayed and
pre-alarm (PRE1) recording will then start.
3
Press and hold the H (HOLD-UP) switch (rear panel).
"POST1-ALARM REC" will be displayed and post-alarm
1 (POST1) recording will start.
Post-alarm recording will stop when the hold-up switch is
released, or when the post-alarm recording time which
was initially set has passed.
4
Release the H (HOLD-UP) switch to stop recording.
•
If there is 20 minutes or more of available recording time remaining in the post-alarm recording
area, pre-alarm 2 (PRE2) recording starts automatically.
•
When the recording area becomes full, "ALARM REC FULL" will be displayed and recording will no
longer be possible.
English
MENU
SET
43
(MAIN MENU)
RECORD START
PLAYBACK
SETTINGS
CONDITION
PRE1-ALARM REC PRE1-ALARM REC
REMAIN SHOTS: 6834 REMAIN SHOTS: 6834
POST1-ALARM REC POST1-ALARM REC POST1-ALARM REC
REMAIN SHOTS: 6834 REMAIN SHOTS: 6834 REMAIN SHOTS: 6834