Advertisement
5. Loosely install the left saddlebag stay as shown.
• Repeat on the right side.
COLLAR E
8 mm WASHER
COLLAR F
8 mm WASHER
LEFT
SADDLEBAG
SUPPORT STAY
6. Install the rubber stop as shown.
• Make two sets.
48 mm
SADDLEBAG
BRACKET
8 mm WASHER
8 mm SOCKET
BOLT (long)
8 mm SOCKET
BOLT (medium)
8 mm SOCKET
BOLT (short)
8 mm WASHER
RUBBER STOP
RUBBER STOP
3 of 3
7.
Install the saddlebag bracket as shown.
• Repeat on the right side.
COLLAR C
SADDLEBAG
BRACKET
8. Install the left saddlebag and tighten all loosely
installed hardware to the specifications in the torque
chart.
• When securing the saddlebag support stay,
first tighten the upper bolts.
• Repeat on the right side.
LEFT
SADDLEBAG
9. Install the motorcycle's parts in the reverse order of
removal.
6 mm SOCKET BOLT
6 mm WASHER
COLLAR D
LEFT
SADDLEBAG
(sold separately)
UPPER BOLTS
LOWER BOLTS
Advertisement
