Advertisement
3
Place the selected cap over the
the top of the RetroJet nozzle
and press firmly against a hard
surface. You will hear a snap
when the pieces have properly
locked together.
5
Allow the nozzle to cycle
through the cleaning process
to ensure that it was installed
properly.
www.1Paramount.com
4
Press the top of the complete
RetroJet nozzle onto the three
prongs of the RetroJet installa-
tion tool*. Guide the nozzle into
the hole in the pool floor and
then rotate clockwise 1/4 turn
to lock in place.
1.800.621.5886
004-027-8783-00
REV033010
3
Place the selected cap over the
the top of the RetroJet nozzle
and press firmly against a hard
surface. You will hear a snap
when the pieces have properly
locked together.
5
Allow the nozzle to cycle
through the cleaning process
to ensure that it was installed
properly.
www.1Paramount.com
4
Press the top of the complete
RetroJet nozzle onto the three
prongs of the RetroJet installa-
tion tool*. Guide the nozzle into
the hole in the pool floor and
then rotate clockwise 1/4 turn
to lock in place.
1.800.621.5886
004-027-8783-00
REV033010
Advertisement
