Advertisement
Diamond X Collection |
III. STEP-by-STEP INSTALLATION
Step 1: Route a 240v mains electric cable near where you would like to install the mirror.
Step 2: Pull the 240v electrical connection through the mirror back plate.
Step 3: Using a spirit level, make sure the back plate is level and in the correct position on the
wall.
Step 4: Next using a drill and screw driver fix the back plate on to the wall, with the fittings
supplied.
Step 5: Now the Back plate is fixed to the wall you can connect the lights, demister pad and
Step 6: Simply place the mirror over the back plate and using a screw driver tighten and fix it
in place.
INSTRUCTION MANUAL
www.illuminated-mirrors.uk.com
CONTENT
Model: 100877K99 & K100
4
Advertisement
