Transporting The Machine - WABECO F1200 Operating Instructions Manual

2. Delivery and set up
The place of set up should be selected in such a way that
■ There is sufficient lighting
■ The electrical power supply with safety socket and earth are installed close enough to the machine
that the power cable is not subject to any strain.
■ The power cable should also be dimensioned in such a way that a multiple socket can be used, for
example, to power a coolant unit.
2.1

Transporting the machine

We recommend three people to lift the machine, using the positions shown (1). In doing so, two people
should hold the machine on the left and right of the upper skid, the third should hold and balance the ma-
chine at the end of the base plate.
Due to the weight of the machine it is advisable to lift the machine by crane, if this is possible. To lift, wrap
suitable lashing (2) as shown around the head of the machine. Before lifting the machine, ensure that the
milling head has been moved to the upper end position to prevent damage to the machine.
When lifting, pay attention to an ergonomic stance and sufficient safety!
1
16
1
1
2