Table of Contents
Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Labcold IntelliCold
Summary of Contents for Labcold IntelliCold
- Page 1 IntelliCold® Pharmacy Refrigerator Operating Instructions www.labcold.com...
- Page 2 Do not store explosive substances such as aerosol cans with fl ammable propellant in this appliance. Labcold RLDF/G refrigerators are for the storing of pharmaceuticals, medicines and WEEE: Disposal at end of life. laboratory products for professional use by suitably trained, competent persons only.
-
Page 3: Table Of Contents
(key)....................14 Digital Door Lock....................15 Caring for your fridge..................18 Loading.................18 Cleaning ...................19 Defrosting................19 Labcold are a UKAS calibration laboratory #8898 8898 Trouble Shooting ....................20 Useful Information....................22 We can calibrate your refrigerator AND your independent thermometer IMPORTANT: These operating instructions contain information essential to the ... -
Page 4: Before Use
Before Use A Closer Look Thank you for purchasing a Labcold IntelliCold® Pharmacy Refrigerator. Your fridge has been Battery Holder purposely designed and precision built for the safe storage of vaccines and other temperature Front Panel Display Door lock (side of the fridge) sensitive pharmaceuticals. -
Page 5: High/Low Temperature Alarm
Plug in & switch on Front Panel Display Before plugging in your Labcold refrigerator for the first time make sure the power cable is free The display on the front of the refrigerator is designed to constantly show the temperature from damage and check that your voltage corresponds to that on the serial plate. -
Page 6: Door Alarm
Internal Light If the temperature in your refrigerator drops below 2 C an alarm will sound and the front panel will alternately flash between and the chamber temperature. There could be a number of Your refrigerator is fitted with an energy saving LED light which is factory set to go on when reasons for this, such as extremely cold items being placed in the fridge. -
Page 7: Using The Sd Card
YOU REQUIRE ONE LABCOLD SD CARD PER FRIDGE, OTHERWISE YOU RISK DATA BEING LOST OR OVER WRITTEN Earlier models will reset to the set point ie 5⁰C. The correct high/low reading will replace ... -
Page 8: Set The Timer
To set the day, use the up and down buttons on the right until the display shows todays date. When you use your Labcold SD card for the first time it is essential that you set the Press the tick button when you have the correct day. The display will then change to allow you current date and time. -
Page 9: Downloading Data
Insert your SD card in to a suitable card reader connected to your computer and open in the the usual way. The Labcold SD card and data download function are designed to allow the capture of temperature data in CSV format which is readable by any spreadsheet application such as Excel Slot for or Numbers. -
Page 10: Error Codes
Door Lock Your Labcold pharmacy and vaccine fridge is fitted as standard with a door lock with 2 keys unless the digital lock has been specified. To lock, push the key in gently and twist 90⁰ to the left, to unlock twist 90⁰... -
Page 11: Digital Door Lock
Digital Door Lock Power failure override If you have opted to have your IntelliCold Pharmacy Refrigerator fi tted with Labcold 1000 DIGILOCKDF the key lock will be removed and the digital lock fi tted in it’s place. • Place a PP3 9 volt battery on the contact points surrounding the LED lights •... -
Page 12: Caring For Your Fridge
The blue LED will flash twice to show the change is successful If you are storing vaccines in your IntelliCold® pharmacy refrigerator, this should be recorded in accordance with recommendations in the DH Green Book, Chapter 3 v2_1 page 28. -
Page 13: Cleaning
Labcold IntelliCold® Pharmacy Refrigerators are designed for temperate climates, 16⁰ • Gently remove the dust on the back of the fridge. Take care not to damage the pipes to 32⁰C, with a humidity of 60% RH. -
Page 14: Useful Information
Please fi ll this in as soon as you get your fridge so we can Your Labcold IntelliCold® refrigerator has a probe placed at the rear of the fridge and the help you as quickly as possible in the event of a problem. temperature displayed is calculated by analysing and averaging the temperature data collected by the probe. - Page 15 www.labcold.com...
Need help?
Do you have a question about the IntelliCold and is the answer not in the manual?
Questions and answers
d-0 what meaning
@Shameer door open
The d-0 error code means the door is closed. The code "D 1(on) or 0(off)" indicates the door status, where 0 means the door is off (closed) and 1 means it is on (open).
This answer is automatically generated
The fridge broke coldchain after restocking at 14:15 hrs on the Monday and was found to be current temp was 6.1, minimum temp was 3.7 and maximum was 10.4 at 18:14pm but was not rest until Tuesday morning at 0800hrs when it was within normal range except for maximum still at 10.4; the fridge was then reset within cold range. The fridge was never opened before it was reset. Can you let me know if it is still safe to use the vaccines.
The Labcold IntelliCold fridge can still be safe to use for vaccines after a temperature fluctuation, but only if the temperature returns to normal and remains stable. After an alarm is triggered due to temperature rise or drop, the cause should be investigated immediately. You should confirm that the temperature returns to normal (5°C after about an hour) and leave the fridge running for 24 hours before storing temperature-sensitive vaccines. Also, reset the maximum/minimum temperature record before use to ensure accurate monitoring.
This answer is automatically generated
FRIDGE BEEPING AND SAYING t2h
When the Labcold IntelliCold fridge is beeping and displaying "t2h", it indicates that the temperature recorded by Temperature Probe 2 (T2) is high. This could be due to warm air entering the fridge, such as when the door has been open too long. The fridge should be closed, and the temperature monitored until it returns to the set point.
This answer is automatically generated
what does code D14 mean on fridge
Code D14 means the door is open. The value 1 indicates it is open (on), and 0 indicates it is closed (off).
This answer is automatically generated
My fridge is not working, there is what I can only assume to be an error code on the front of the fridge that has the letter t in the second column and nothing else showing however this error code does not seem to show up on any of my searches, is my fridge totally broken or can this be fixed?
The error code with the letter 't' in the second column (Column B) refers to Temperature Probe 1. If it shows an error such as "Start Error," it indicates a total system failure. This means the fridge should not be used, and the contents should be removed immediately. It cannot be fixed by the user and requires contacting the retailer.
This answer is automatically generated
Fridge RLDF 1510A dEF display on display
@Khurshid is this an error code?
The fridge is alarming and displaying Y86 but unable to reset
We have an error code on Model RLDF0119 of 'H06' what does this mean?
My New Fridge Labcold RLDG1019 is alarming with error code n-b Could you advise please Serial Number 25800905_3000079
We have a 10 year old Labcold fridge, we are unable to unlock the key pad to try to initiate a 24 hrs defrost without powering down the fridge.