Related Manuals for HBX THM-0100
Summary of Contents for HBX THM-0100
- Page 1 Installation Manual THM-0100 Setpoint Thermostat Version 1.041 THM-0100 HBX Control Systems Inc.
-
Page 2: Table Of Contents
The HBX THM-0100 is a microprocessor based controller and as such is not to be regarded as a safety (limit) control. Please consult and install the heating or cooling appliance in accordance with the manufacturer’s recommendations. -
Page 3: Receipt And Inspection
P.I.D. algorithm. Using the included external sensor input allows for floor, remote room or outdoor temperature sensing. The THM-0100 can be used as a single setpoint control allowing for the operation of DHW (Digital Aquastat), pumps and other equipment. -
Page 4: Programming Thm-0100
See diagram 2 for wiring example. Setpoint Function SPECIAL FUNCTIONS Select the “Setpoint Function” for applications using 1) TYPE SETPNT 2) VIEW ALL pumps, fancoils and other equipment. See diagram 3 for wiring example. © 2014 HBX Controls... -
Page 5: Adjustments
View All/ Hide All SPECIAL FUNCTIONS Use this setting to control the information displayed 1) TYPE COOL 2) VIEW ALL on the Status Screen. 10:00am HEAT 10:00am ROOM ROOM ROOM 72.0 72.0 72.0 °F °F °F FLOOR TARGET 79°F 72°F “View All”... - Page 6 Floor – The external sensor is used to display the floor temperature. Outdoor – The external sensor is used to display the outdoor temperature. Room Average - This setting averages the external sensor and internal sensor to control the room temperature. © 2014 HBX Controls...
- Page 7 Floor Mode Floor Mode HEATING ADJUSTMENT Sensor temperature providing feedback from the 1) ROOM TEMP 70°F 2) MODE FLOOR floor surface to the thermostat. This mode will run 3) DIFF 20°F the thermostat on floor temperature only. 4) C OR F °F 5) BACKLIGHT 6) TIME...
- Page 8 Floor – The external sensor is used to display the floor temperature. Outdoor – The external sensor is used to display the outdoor temperature. Room Average - This setting averages the external sensor and internal sensor to control the room temperature. © 2014 HBX Controls...
- Page 9 Celsius or Fahrenheit COOLING ADJUSTMENT Change the values in the thermostat to display 1) ROOM 70°F 2) SENSOR 1 FLOOR either the Celsius or Fahrenheit scale. 3) C OR F °F 4) BACKLIGHT 5) TIME 1:05am Backlight COOLING ADJUSTMENT Toggling this option will turn the backlight feature 70°F 1) ROOM 2) SENSOR 1...
- Page 10 MOUNTING AND WIRING INSTRUCTIONS Mounting Guide Once you have wired the terminal block, the THM-0100 can be mounted on the desired interior wall. The unit should be placed in an area clear of drafts or other heating or cooling sources which may influence the temperature reading of the thermostat.
- Page 11 WIRING DIAGRAMS Wiring Guide 1 - 2: Dry Contact Output 3 - 4: External Thermistor 5 - 6: 10-24V AC or DC 1) Heating 1. h eating THM-0100 Thermostat THM-0100 Thermostat DO NOT DO NOT CONNECT CONNECT POWER HERE POWER HERE...
-
Page 12: Installation And Wiring
CONNECT POWER HERE POWER HERE 24V AC 24V AC Dry Contact Output Transformer Transformer 24VAC 24VAC 3) Setpoint 3. s etPoint Thermostat THM-0100 DO NOT CONNECT POWER HERE 24V AC Sensor Dry Contact Output Transformer 24VAC © 2014 HBX Controls... - Page 13 NOTES:...
- Page 14 NOTES: © 2014 HBX Controls...
-
Page 15: Limited Warranty
In no event will HBX be liable for any damages, including loss of data, loss of profits, costs of cover or other incidental, consequential or indirect damages arising out of the installation, maintenance, commissioning, performance, failure or interruption of an HBX product, however caused and on any theory of liability. - Page 16 V1.02 Toll Free Technical Support: +1 (855) 554-6629...
Need help?
Do you have a question about the THM-0100 and is the answer not in the manual?
Questions and answers