Omega OM-CP-OM-CP-OCTPRO User Manual page 9

OM-CP-OCTPRO
USER INTERFACE
Measurement Setup
When the user selects a Measurement Parameter, the device will display the relevant options for that selection. Example shown are the
Voltage options.
Select Channel Configuration
Measurement Units
When the user selects the Units button, the device will display a pop-up menu of the relevant options for that selection. Example
shown are the Voltage options.
Select Channel
Select Channel
Select Measurement Parameter
Select the Measurement button to display a pop-up
screen of relevant measurement types to choose from.
Select Measurement Parameter
Engineering Units: This will be an option to set up if
the user selects the Voltage, Current or Pulse sensor (see
details below and on page 9-10).
Select Measurement Type
Select Measurement Type
Select Measurement Units
Product User Guide | 8